Industrial Nitrogen Gas Dry Oven

Baking dry box combines ultra-low humidity control technology with low temperature baking, which meets the long-term storage environment of 40℃, <10%RH, the baking dry box is designed for storing electronic components,PCB, MSD in a hot and dry atmosphere.

Model: TDE320F
Capacity: 320L
Temperature & humidity range: 40℃ <10%RH
Recovery time: Max. 30 min after open door 30 seconds then closed. (Ambient 25℃ 60%RH)
Shelves: 3pcs, height adjustable
Color: Dark blue, ESD safe
Interior dimension: W898*D422*H848 MM
Exterior dimension: W900*D450*H1010 MM

A PCB (Printed Circuit Board) baking oven is an industrial oven that is used to cure or bake electronic components. PCB Baking Oven is a controlled oven that cures the epoxy or solder mask that is applied to the surface of the PCB, and remove the moisture inside.

Model: TG-9123A
Capacity: 120L
Interior Dimension: 550*350*550 mm
Exterior dimension: 835*530*725 mm

Climatest Symor® vacuum heating oven is designed for the rapid and efficient drying treatment of thermal sensitivity, easy to decompose, easy to oxidize substances and complex components. It can rush into inert gases such as nitrogen (optional), and the heating temperature is generally 50°C ~200°C .

Model: TZF-6090
Capacity: 90L
Interior Dimension: 450*450*450 mm
Exterior dimension: 755*595*720 mm

Benchtop thermal humidity chamber, also called benchtop temperature humidity chamber, uses air circulation to maintain uniform temperature and humidity in the testing room, it provides an economical and space-saving solution for testing small products, this benchtop thermal humidity chamber meets high performance to fulfil your environmental testing needs.

Model: TGDJS-50T
Capacity: 50L
Shelf: 1pc
Color: Blue
Interior dimension: W350×D350×H400mm
Exterior dimension: W600×D1350×H1100mm

Nitrogen dry cabinet adopts nitrogen gas supply to squeeze moist air out, in order to maintain an anti-oxidization and low humidity storage environment, Nitrogen dry cabinet is equipped with nitrogen-saving device (QDN module), when the interior humidity is 1-2 points higher than the set point, QDN is activated and start filling nitrogen gas, when the interior humidity reach the set point, QDN stops filling nitrogen gas, this saves much nitrogen consumption, the whole process is automatically controlled.

Model: TDN1436-4
Capacity: 1436L
Humidity: 1%-60%RH adjustable
Shelves: 5pcs, height adjustable
Color: Off white
Interior dimension: W1198*D682*H1723 MM
Exterior dimension: W1200*D710*H1910 MM

Climatest Symor® is temperature shock test chamber manufacturer and supplier in China. This chamber has hot zone and cold zone, during the test, there is a pneumatic basket holds the specimen and transfers between two zones automatically in a short time, so as to assess products reliability under dramatically temperature changing.

Model: TS2-100
Capacity: 100L
Interior Dimension: 400*500*500 mm
Exterior dimension: 1350*1800*1950 mm